Good Saturday..aka.Bom Sabado…facts September 25, 2010

Google’s social networking website Orkut has been attacked by virus called “Bom Sabado” on Saturday morning, which is a big treat for orkut . “Bom sabado” is a Portuguese world it means “Good Saturday” in English.
General methods of hacking Orkut
a/c:-

1. Phishing using fake page.
2. Using
Keyloggers / remote key loggers.
3. Brute force attack.
4. Using
Java Scripts.
5. Using greasemonkey scripts.
6. By cookie stealing
method.
7. Other methods.

Explanation of each method is
beyond the level and i dont wanna go in details.

IF you got struck with the virus,do follow the steps asap.

1. Try to reset your password from here:

http://www.google.com/support/accounts/bin/answer.py?answer=48598&hl=en&ctx=ch_ServiceLogin&p=orkut&fpUrl=https://www.google.com/accounts/ForgotPasswd%3FfpOnly%3D1%26continue%3Dhttp%253A%252F%252Fwww.orkut.com%252FRedirLogin%253Fmsg%253D0%2526page%253Dhttp%25253A%25252F%25252Fwww.orkut.co.in%25252FHome%26cd%3DIN%26hl%3Den-US%26service%3Dorkut%26skipvpage%3Dtrue

or

http://www.google.com/support/orkut/bin/answer.py?hl=en&answer=11576

2.
If not able to do so then fill this form providing as much correct
details as you can. ( the correctness of info provided will determine
weather you will get back your a/c or not so give yur best guess if you
dont remember something ):

Contact us for password reset:
https://www.google.com/support/accounts/bin/request.py?ara=1&hl=en&contact_type=ara&ctx=ara

3.
If your Orkut Account has been deleted after being hacked. do fill the
form immediately:

https://www.google.com/support/accounts/bin/request.py?ara=1&hl=en&contact_type=ara&ctx=ara

you
will get password reset link through email. Do change your password and
login to your a/c as soon as you can.

NOTE:- if hacker has
deleted your gmail a/c with all it’s product / or it’s more than 24
hours after deleting your Orkut a/c, YOU CANNOT GET IT BACK.

4.
Always remember these points:

4.1 Donot ever login to any site
rather than www.orkut.com

4.2 Donot ever run any
javascripts while logged into your orkut account

4.3 Never use
any flooder in your account

4.4 Donot ever share your password
with anyone else and keep changing your password regularly.

4.5
Donot ever click suspicious link while logged into Orkut a/c. if you are
curious you can copy the link and check them in
other
browser after cleaning it’s browser’s cookie and cache.

4.6 Donot
ever install any suspicious script on greasemoneky and ALWAYS DIABLE
THE GM before logging in to orkut.

4.7 Do your mobile
verification also, so that you can get back your a/c if hacker doesn’t
change the mobile number there.
http://www.orkut.co.in/Main#MobileSetupSettings

4.8
Install a good Update Ant ivirus and Anti Key logger and keep your
system free from Key loggers and backdoor trojans.

4.9 Use
Virtual Keyboard to enter your password for more securite. KIS 2010
provides it and there are many other V.
keyboards available.

Take a look here and follow the points given to protect your a/c:
http://www.google.com/support/orkut/bin/answer.py?hl=en&answer=57442

and
http://www.google.com/support/orkut/bin/answer.py?hl=en&answer=48579

Users are requested not to open the orkut accounts until the problem is solved.

Mozila firefox Tweaks May 23, 2010

Firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more?

That’s the beauty of this program being open source.

Here’s what you do:

In the URL bar, type “about:config” and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox.

Note that these are what I’ve found to REALLY speed up my Firefox significantly – and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections – I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection.

Double Click on the following settins and put in the numbers below – for the true / false booleans – they’ll change when you double click.

Code:

browser.tabs.showSingleWindowModePrefs – true

network.http.max-connections – 48

network.http.max-connections-per-server – 16

network.http.max-persistent-connections-per-proxy – 8

network.http.max-persistent-connections-per-server – 4

network.http.pipelining – true

network.http.pipelining.maxrequests – 100

network.http.proxy.pipelining – true

network.http.request.timeout – 300

One more thing… Right-click somewhere on that screen and add a NEW -> Integer. Name it “nglayout.initialpaint.delay” and set its value to “0”. This value is the amount of time the browser waits before it acts on information it receives. Since you’re broadband – it shouldn’t have to wait.

Now you should notice you’re loading pages MUCH faster now!

Computer Acronyms May 21, 2010

— A—

ADSL – Asymmetric Digital Subscriber Line

AGP – Accelerated Graphics Port

ALI – Acer Labs, Incorporated

ALU – Arithmetic Logic Unit

AMD – Advanced Micro Devices

APC – American Power Conversion

ASCII – American Standard Code for Information Interchange

ASIC – Application Specific Integrated Circuit

ASPI – Advanced SCSI Programming Interface

AT – Advanced Technology

ATI – ATI Technologies Inc.

ATX – Advanced Technology Extended

— B —

BFG – BFG Technologies

BIOS – Basic Input Output System

BNC – Barrel Nut Connector

— C —

CAS – Column Address Signal

CD – Compact Disk

CDR – Compact Disk Recorder

CDRW – Compact Disk Re-Writer

CD-ROM – Compact Disk – Read Only Memory

CFM – Cubic Feet per Minute (ft/min)

CMOS – Complementary Metal Oxide Semiconductor

CPU – Central Processing Unit

CTX – CTX Technology Corporation (Commited to Excellence)

— D —

DDR – Double Data Rate

DDR-SDRAM – Double Data Rate – Synchronous Dynamic Random Access Memory

DFI – DFI Inc. (Design for Innovation)

DIMM – Dual Inline Memory Module

DRAM – Dynamic Random Access Memory

DPI – Dots Per Inch

DSL – See ASDL

DVD – Digital Versatile Disc

DVD-RAM – Digital Versatile Disk – Random Access Memory

— E —

ECC – Error Correction Code

ECS – Elitegroup Computer Systems

EDO – Extended Data Out

EEPROM – Electrically Erasable Programmable Read-Only Memory

EPROM – Erasable Programmable Read-Only Memory

EVGA – EVGA Corporation

— F —

FC-PGA – Flip Chip Pin Grid Array

FDC – Floppy Disk Controller

FDD – Floppy Disk Drive

FPS – Frame Per Second

FPU – Floating Point Unit

FSAA – Full Screen Anti-Aliasing

FS – For Sale

FSB – Front Side Bus

— G —

GB – Gigabytes

GBps – Gigabytes per second or Gigabits per second

GDI – Graphical Device Interface

GHz – GigaHertz

— H —

HDD – Hard Disk Drive

HIS – Hightech Information System Limited

HP – Hewlett-Packard Development Company

HSF – Heatsink-Fan

— I —

IBM – International Business Machines Corporation

IC – Integrated Circuit

IDE – Integrated Drive Electronics

IFS- Item for Sale

IRQ – Interrupt Request

ISA – Industry Standard Architecture

ISO – International Standards Organization

— J —

JBL – JBL (Jame B. Lansing) Speakers

JVC – JVC Company of America

- K —

Kbps – Kilobits Per Second

KBps – KiloBytes per second

— L —

LG – LG Electronics

LAN – Local Area Network

LCD – Liquid Crystal Display

LDT – Lightning Data Transport

LED – Light Emitting Diode

— M —

MAC – Media Access Control

MB - MotherBoard or Megabyte

MBps – Megabytes Per Second

Mbps – Megabits Per Second or Megabits Per Second

MHz – MegaHertz

MIPS – Million Instructions Per Second

MMX – Multi-Media Extensions

MSI – Micro Star International

— N —

NAS – Network Attached Storage

NAT – Network Address Translation

NEC – NEC Corporation

NIC – Network Interface Card

— O —

OC – Overclock (Over Clock)

OCZ – OCZ Technology

OEM – Original Equipment Manufacturer

— P —

PC – Personal Computer

PCB – Printed Circuit Board

PCI – Peripheral Component Interconnect

PDA – Personal Digital Assistant

PCMCIA – Peripheral Component Microchannel Interconnect Architecture

PGA – Professional Graphics Array

PLD – Programmable Logic Device

PM – Private Message / Private Messaging

PnP – Plug ‘n Play

PNY – PNY Technology

POST – Power On Self Test

PPPoA – Point-to-Point Protocol over ATM

PPPoE – Point-to-Point Protocol over Ethernet

PQI – PQI Corporation

PSU – Power Supply Unit

— R —

RAID – Redundant Array of Inexpensive Disks

RAM – Random Access Memory

RAMDAC – Random Access Memory Digital Analog Convertor

RDRAM – Rambus Dynamic Random Access Memory

ROM – Read Only Memory

RPM – Revolutions Per Minute

— S —

SASID – Self-scanned Amorphous Silicon Integrated Display

SCA – SCSI Configured Automatically

SCSI – Small Computer System Interface

SDRAM – Synchronous Dynamic Random Access Memory

SECC – Single Edge Contact Connector

SODIMM – Small Outline Dual Inline Memory Module

SPARC – Scalable Processor ArChitecture

SOHO – Small Office Home Office

SRAM – Static Random Access Memory

SSE – Streaming SIMD Extensions

SVGA – Super Video Graphics Array

S/PDIF – Sony/Philips Digital Interface

— T —

TB – Terabytes

TBps – Terabytes per second

Tbps – Terabits per second

TDK – TDK Electronics

TEC – Thermoelectric Cooler

TPC – TipidPC

TWAIN – Technology Without An Important Name

— U —

UART – Universal Asynchronous Receiver/Transmitter

USB – Universal Serial Bus

UTP – Unshieled Twisted Pair

— V —

VCD – Video CD

VPN – Virtual Private Network

— W —

WAN – Wide Area Network

WTB – Want to Buy

WYSIWYG – What You See Is What You Get

— X —

XGA – Extended Graphics Array

XFX – XFX Graphics, a Division of Pine

XMS – Extended Memory Specification

XT – Extended Technology

10 reasons why PCs crash May 12, 2010

Fatal error: the system has become unstable or is busy,” it says. “Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications.”

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1. Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow ‘!’ appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as ‘IRQ holder for PCI steering’. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2. Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3. BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer’s display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to ‘yes’ to allow Windows to do this.).

4. Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5. Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card’s manufacturer on the internet and search for the most recent drivers for it.

6. Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

7 .Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer’s performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer’s default settings and you may be able to carry on.

8 .Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on almost all windows platforms

Read the instructions and use it carefully so you don’t do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message “Starting Windows” press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn’t work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 .Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10. Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

OMG My Orkut has been hacked.! April 1, 2010

This was a fake news.heeeeee heeeeeeeeee…..

all had been fooled….!

Barcamp Kerala 8 March 11, 2010

The BarCamp Kerala 8  is scheduled to be held at  MACFAST, Thiruvala on March 28^th, 2010. Finally its here to refresh the minds with technical beverages – its Barcamp time.

New to hear Barcamp..??

BarCamp is an international network of user generated conferences – open, participatory workshop-events, whose content is provided by participants – often focusing on early-stage web applications, and related open source technologies, social protocols, and open data formats.

need to know more?

Venue

BarCamp Kerala 7 will be held at MACFAST, Thiruvala

More deatails

Registeration

You can register for the event in the BarCamp Kerala Site. Till now we have 91 attendees.

Sessions

We have 13+ sessions currently in list. If you want to handle a sessions at BarCamp, you can add yourself in the sessions page.

BarCamp Kerala So Far…

If you are still uncertain about coming to BCK, checkout these reports about the previous ones…

• Barcamp Kerala 5
• BarCamp Kerala 5 @ Technopark on May 3rd
• Barcamp Kerala LiveBlog
• First ever BarCamp in Kerala on November 24th, 2007
• BarCamp Kerala 2007
• BarCamp Time for Kerala
• Barcamp Kerala 6
  
• BarCamp Kerala 2
• BCK7, Christmas Edititon
  

BarCamp is an international network of user generated conferences – open, participatory workshop-events, whose content is provided by participants – often focusing on early-stage web applications, and related open source technologies, social protocols, and open data formats.

Wikipedia

Venue

BarCamp Kerala 8 will be held at MACFAST, Thiruvala. More details are available at the venue page

Registeration

You can register for the event in the BarCamp Kerala Site. When this post was written we have 65 attendees.

Sessions

Till now we have 6 sessions. If you want to handle a sessions at BarCamp, you can add yourself in the sessions page.

BarCamp Kerala So Far…

If you are still hesitant about coming to BarCamp Kerala, checkout these reports about the previous ones…

• BarCamp Kerala on May 3
• Barcamp kerala 6
• About Geeks and BarCamps
• Barcamp Kerala 6 – my experience
• BarCamp Time for Kerala

Tweet This Post Delicious Digg This Post Facebook MySpace Ping This Post Reddit Stumble This Post

// //

Computer Virus…. March 1, 2010

Now let us study the anatomy of a basic class of viruses. These properties are inherent of most viruses though the level of adaptation may differ from species to species. I can say that a virus has basically three parts
1. Replicator - The replicators job is to ensure the survival of the virus on a system. Most successful viruses do this by not inflicting damage on the system but by appending themselves to legitimate programs in the machine. Each time the program is run then the virus will ‘wake up’ and start to reproduce. As said earlier, this is the most important part of the virus code.
2. Concealer - This part of the virus has the job of hiding the virus. It uses a number of methods to do this but the point is if you don’t know a virus is there then you wont try and kill it. Today’s viruses use advance techniques to stop being caught from Antivirus software.
3. Payload - The payload of a virus can be practically anything, in fact if it can be programmed then it can be the payload. If a virus is going to have a long life then any damage it causes must either be very slight or not take place for a long period after infection. If an obvious payload gets delivered soon after infection then the user is soon going to notice and will go virus hunting. This does not help the long life or wide spread of a virus.

A computer virus may be categorized with one or more of the following four designations:
* Boot sector computer virus
* Master Boot Record (MBR) computer virus
* File infector computer virus
* Macro computer virus

…………..contd

A love note to my valentine……! February 14, 2010

To my everloving princess,

Ever since you walked into my life I have been smiling. There hasn’t been a night when I have gone to sleep with a frown on my face, and it’s all because of you.

Honey, I am glad that you came into my life. I have always wanted the love of my life to be understanding, loving, caring, and faithful. I wanted someone who would accept me for who I am. I know that I’ve found that person in you. My heart told me that my princess was there when I first said hello to you over the phone.

I didn’t have to think twice befor I ask you to be my wife. I knew that you were the perfect match for me. I don’t think that there is, or that there ever could be, anyone better than you out there for me.

I love you with my whole heart. I have never trusted anyone the way I trust you. Sometimes I even doubt myself, but I know I will never doubt you because you are my true love. I know deep down inside that you will never break my heart or let me down in any way.

Thank you for everything, honey. I pray to God every day to bless you with everything you deserve. I will love you until the end of time.

Always and Forever

Yours sweet heart

Navigation Shortcuts January 13, 2010

• Tab: Forward one item.
• Shift + Tab: Backward one item.
• Ctrl + Tab: Cycle through tabs/child windows.
• Ctrl + Shift + Tab: Cycle backwards through tabs/child windows.
• Enter: If a button’s selected, click it, otherwise, click default button.
• Space: Toggle items such as radio buttons or checkboxes.
• Alt + (Letter): Activate item corresponding to (Letter). (Letter) is the underlined letter on the item’s name.
• Ctrl + Left: Move cursor to the beginning of previous word.
• Ctrl + Right: Move cursor to the beginning of next word.
• Ctrl + Up: Move cursor to beginning of previous paragraph. This and all subsequent Up/Down hotkeys in this section have only been known to work in RichEdit controls.
• Ctrl + Down: Move cursor to beginning of next paragraph.
• Shift + Left: Highlight one character to the left.
• Shift + Right: Highlight one character to the right.
• Shift + Up: Highlight from current cursor position, to one line up.
• Shift + Down: Highlight from current cursor position, to one line down.
• Ctrl + Shift + Left: Highlight to beginning of previous word.
• Ctrl + Shift + Right: Highlight to beginning of next word.
• Ctrl + Shift + Up: Highlight to beginning of previous paragraph.
• Ctrl + Shift + Down: Highlight to beginning of next paragraph.
• Home: Move cursor to top of a scrollable control.
• End: Move cursor to bottom of a scrollable control.

General Shortcuts January 13, 2010

• Ctrl + C or Ctrl + Insert: Copy.
• Ctrl + X or Shift + Delete: Cut.
• Ctrl + V or Shift + Insert: Paste/Move.
• Ctrl + N: New… File, Tab, Entry, etc.
• Ctrl + S: Save.
• Ctrl + O: Open…
• Ctrl + P: Print.
• Ctrl + Z: Undo.
• Ctrl + A: Select all.
• Ctrl + F: Find…
• Ctrl+W : to close the current window
• Ctrl + F4: Close tab or child window.
• F1: Open help.
• F11: Toggle full screen mode.
• Alt or F10: Activate menu bar.
• Alt + Space: Display system menu. Same as clicking the icon on the titlebar.

Escape: Remove focus from current control/menu, or close dialog box.